Vacuum casting

美 [ˈvækjuːm ˈkæstɪŋ]英 [ˈvækjuːm ˈkɑːstɪŋ]
  • 网络真空铸造;真空注型
Vacuum castingVacuum casting
  1. New Process of Vacuum Casting

    真空铸造新工艺

  2. Vacuum casting high strength c / mg Composites

    真空铸造高强度C/Mg复合材料

  3. The realization of vacuum casting control system based on PLC

    基于PLC的真空注型控制系统的实现

  4. Study of Polyurethane Resin with Heat Resistance for Vacuum Casting Manufacture ;

    对真空浇注下结晶器内流体流动行为进行了研究。

  5. Effect of Vacuum Casting on Molten Steel Flow in Mold

    真空浇注对结晶器内流体流动行为的影响

  6. Effect of vacuum casting process on microstructure and properties of CuCr alloy

    真空熔铸工艺对铜铬合金组织与性能的影响

  7. Material selection and process discussion of vacuum casting in automotive air intake manifold

    汽车进气歧管真空注型材料选用和工艺探讨

  8. Study on Precision Vacuum Casting for Magnesium alloy

    镁合金熔模真空吸铸的研究

  9. Foundry CAE Technology and its Applications on Lost Foam and Vacuum Casting

    铸造CAE技术及其在消失模与V法铸造中的应用

  10. Aiming at the technical demand of Vacuum Casting System , the electric Control System Based on PLC is adopted .

    针对真空注型系统的工艺要求,采用基于PLC的电气控制系统。

  11. The new techniques in vacuum casting molding and liquid injection molding of silicone rubber were also described .

    并介绍了真空浇注成型和液体注射成型等硅橡胶加工的新技术。

  12. Two ingredients polyurethane for vacuum casting

    真空浇注用二组分聚氨酯的研究

  13. Reparation of YSZ Electrolyte Membrane Tube by Vacuum Casting and Its Application to Solid Oxide Fuel Cells

    真空注浆法制备YSZ电解质膜管及其在固体氧化物燃料电池中的应用

  14. New auto dispenser speeds vacuum casting

    新型自动配料装置提高了真空铸造速度

  15. So we can draw the conclusion of that , vacuum casting method is a relatively perfect shark skin replication method .

    因此从结果上来看,真空浇注法是一种相对较为理想的鲨鱼皮复制方法。

  16. Polyurethane resin ( PU ) is an important materials and used widely for Vacuum Casting manufacture because of its convenient process and high performance .

    聚氨酯树脂材料(PU)由于适合室温真空双组分浇注工艺,其制品综合性能优异,因而被广泛的运用于RP&M和RT中,它是快速成形制造技术中的一种重要的成形材料。

  17. The research results show that the vacuum casting is a simple way preparing the YSZ electrolyte membrane tubes with high density and high electrical conductivity .

    研究结果表明,真空注浆法是一种制备高烧结性能YSZ电解质膜管的简单方法。

  18. Contact angle experiments on imitative shark skin fabricated by vacuum casting method and smooth silicone surface were carried out by drop shape analysis system .

    采用液滴形状测量仪,进行了真空浇注法制备的硅橡胶仿鲨鱼皮与光滑硅橡胶进行接触角测量实验。

  19. And used UG software for the virtual design , assembling and optimal analysis of the vacuum casting machine door gemel , based on virtual design idea .

    介绍了UG软件中的虚拟设计、虚拟装配、优化分析技术,并基于虚拟设计的思想,运用UG软件对真空注型机的门铰链进行虚拟建模、装配和优化分析。

  20. I chose vacuum casting job as my starting point of comprehending plant work without hesitation because of my interest and enhancing hands-on ability .

    由于对复模工艺的兴趣以及为了提高动手能力,我毫不犹豫地选择了公司的复模部作为自己熟悉车间工作的起点。

  21. With epoxy resin as matrix and carbon nanotubes as reinforcements , carbon nanotubes / epoxy resin nanocomposites were prepared by vacuum casting method .

    以环氧树脂为基体,碳纳米管为增强体,用真空浇铸法制备碳纳米管/环氧树脂纳米复合材料。

  22. Under the bottom pouring vacuum casting process conditions , the alloy liquid has a strong filling capacity not only in the direction of gravity but also the horizontal direction .

    从而验证在底注式真空吸铸工艺条件下,合金液不仅在重力方向具有很强的充型能力,而且在水平方向也能够很好的充填铸型。

  23. The advantages of PLC acting as the main controller of Vacuum Casting control System are analyzed , and the key technologies and realizing methods on the construction of control system are deeply studied .

    分析了PLC作为真空注型控制系统的主控制器的优点,深入研究了控制系统搭建的关键技术和实现方法。

  24. Result of testing shows that proPerty of sand casting bushing is unsatisfactory and that of vacuum casting bushing is better , which can be used to replace the pressed bushing .

    试验结果表明,砂型铸造铜套性能较差,而真空吸铸铜套性能较好,可以替代卷制铜套。

  25. This system can be used for FW , RTM , APC , Vacuum casting , spray-up processes , after changing the formulation , it can also used for bulk making bulk compounds and prepregs .

    该体系广泛适用于玻璃纤维缠绕、RTM、APG、真空浇注、纤维喷射成型等复合材料生产工艺,通过配方设计还可制备团状或箔式预浸材料使用。

  26. In one word , the microstructure of the directly formed super alloy by plasma fused deposition was in accordance with standards of applied super alloy part , superior to precision vacuum casting , thus the technology showed its much better value .

    等离子熔积直接成形组织结构能够满足高温合金零件的要求,优于现有的真空铸造工艺,具有良好的实用价值。

  27. Study on Vacuum Suction Casting Process for Aluminum Alloy Casting

    铝合金铸件真空吸铸工艺的研究

  28. Technology in Vacuum Investment Casting for Heat Resistance Alloy Vane

    高温合金叶片的真空精铸工艺

  29. The Research of Powder Release Agent for Aluminum Alloy Vacuum Die casting

    铝合金真空压铸用粉状脱模剂的研究

  30. Optimization of Technology Parameters of the Vacuum Counter-pressure Casting Based on Intelligent Control

    智能控制的真空差压反重力铸造工艺参数优化